Prelim task evaluation

For my groups preliminary task we were filming in the studio. The studio was the most useful location for filming as it allowed us to use more advanced equipment which would improve our video, e.g. real studio lighting, blue screen.
When filming I would usually take care of the bubbling of the camera by myself but I worked with the group when we moved the camera into position as the position of the camera was worked out with the entire group and not just myself. I occasionally took care of the height and locking of the tripod as well as setting up the camera so it was ready to shoot with (focus, contrast, brightness etc). However as I was in the actual footage as well I sometimes had to remain on set and could not help with the actual filming.
As for the lighting of the sequence we went for a dark and hard look to emphasize the brutality of the area within which the scene was situated and the darkness of the situation which the characters found themselves. I personally found the lighting very useful as it helped establish scene and setting for the audience.
When we began filming we started off by placing the camera into the tripod and locked it in properly so we no longer needed to worry about it falling out. We then placed the camera in a wide shot position for an entire run through. When the camera was in position we increased the height of the tripod, to not give a hero aspect to both characters, and made sure it was balanced. We then bubbled the camera so that the footage wouldn’t be shown at an angle. As for the camera we set it up just before shooting so that no conditions were changed before shooting without us knowing about it. We made sure that the contrast, zebra, and brightness; peaking, tally lights and focus were all set up correctly. Making sure the camera was set up correctly made sure the shot we took would not be out of focus, too bright or too dark, too grainy, have too much empty space and would not be awful to look at. We moved the camera into several other positions as well, (close up, over shoulder, medium close up, two shot), so that we had all the footage we needed before post-production. Each time we moved the camera we had to set it up from the very beginning again so we wanted to move it around as little as possible so we had to make sure that we had all the footage from one position which we wanted before we moved on.
We made sure that the actors knew their markers so that when we did the other shots we could transition the shots without them actors firstly appearing on one part of the set and then in the second shot somewhere entirely different. We also had to make sure there weren’t any unwanted objects on set we filmed a run through, for example lighting cables in the background, which would ruin the shot. When we were about to begin filming we made sure we used the appropriate terminology to make sure everybody on set knew what was going on. I tried to make sure that we lead in and lead out of every shot successfully however I noticed some times that we did not lead in and lead out properly or as I would have hoped as several times the cameraman was too fast with the action and the cutting of the part of the filming. The leading in and leading out of shots would have been useful for us as it would have allowed us to get everything out of the shot we wished to get but what is done is done and it would seem we might have to deal with the post-production out the leading in and out shots. Overall I think we successfully captured all the shots we wanted to capture.